The HIsmelt reductive melting process has attracted attention because of its short process，good raw material compatibility and high product quality. Due to its high secondary combustion rate，the increase of FeO content in the slag can lead to increased more erosion in the furnace. Therefore，HIsmelt reduction melting can be used referring to blast furnace to use titanium-bearing raw materials for furnace protection operation. The main sources of raw materials for the production of titanium-containing pellets include vanadium titanomagnetite，ilmenite and marine placer，most of which are coarse，small in specific surface area and poor in hydrophilicity. In order to produce high-quality titanium-bearing pellets， vanadium titanomagnetite and marine placer are used as titanium-bearing materials for pelletization experiments，and the effects of different titanium-bearing raw materials and their different addition ratios on the quality of fresh pellets，preheated pellets and finished pellets are observed. The results show that the preheating temperature required for conventional pellets is 1 000 ℃，and the preheating temperature required for titanium-bearing pellets is lower at 950 ℃，while the roasting temperature is the same as that for conventional pellets. Adding 20% vanadium titanomagnetite or 20% marine placer can produce low titanium pellets，the reduction degree of the two titanium-bearing pellets is relatively low，the reduction expansion index is less than 15% ，and its physical properties，metallurgical properties and chemical composition reach the requirements of industrial production.